Toàn Quốc Các thông tin về gốm

Thảo luận trong 'Quảng cáo tổng hợp' bắt đầu bởi seoeisp, 30/5/16.

  1. seoeisp

    seoeisp New Member

    polystone planters is one of the most popular and everyone likes .Gom not just household items or glove but it is also as decorative products, gifts ...

    Vietnamese pottery process meticulously :

    Step 1: Choose land

    The source of distasteful that people often choose white clay is clay chinh.Dat product is made of ceramic materials that before this the best ceramic artists are using
    Clay has a high viscosity, soluble in water, fine-grained, gray-white, the refractory above 1500 degrees c

    Step 2 : Handling and preparation of soil

    terracotta pottery Soil always contains impurities, depending on the requirements of each different type of ceramic that can have different soil mixing to create the most suitable products. Depending on where there is different treatment but are common processes such as water treatment through immersion in the treatment tank system, at a height of 4 different surfaces.

    Swimming first: the highest position, this tank is used to soak the raw clay and water, soak for about 3-4 months time.
    Clay under the action of water will be broken structure to its original grain and start the process of land ra.Khi nine, against the land of truth are, true to real soil particles to water soluble forma liquid mixture.

    Then remove the mixture lap down 2 tank called the sedimentation tank or filtration .In this clay surface began to settle, some emerging contaminants, proceed to remove them
    After that draw from the clarifier tank to dilute the secondary pool surface is called an exposed, often dry soil Bat Trang people here about 3 days, then move on to the fourth ground pools incubated with the respective incubation tank .Infermentation and other impurities that are reduced by means of fermentation and hoped to bring incubation period as long as possible.

    Step 3 Shape:

    Traditional methods of shaping pottery village that is made by hand on the turntable In shaping stages, potters always clawed hands, be on the turntable loaches, previous work by women are often still in charge.Mechanic sitting on a chair above the table and then use foot rotating turntable and stroked the pham.Dat shaping land before putting them into the jar turntable is very fine, on the diamond and threw to shorten the . Then they put in that between decks, pat stick then compressed soil and ground very fine scissors for new flexible type of land and the huong celebrated mainly by two fingers inside phai.Sau process of pulling it by hand andto the extent necessary porcelain craftsmen will use to shape dan gourmet products .

    Products clipping advantages and disadvantages finished, cut legs into stomach.Jobs placed on women using swipe turntable original shape of the product is a normal stage in every kilns popular but very far from South Vietnamstrange to some western ceramics.

    Step 4: Drying and fixing wooden products

    Proceed exposed wooden products so dry, without cracks, does not alter the shape of the product. Optimization measures that this ancient potters still use to dry, to place objects on a cool price.

    Even this part of many families use artifacts measures in kiln drying, increase the temperature slowly to allow the water to evaporate slowly

    When the product was shaped and revised for a complete truth.

    Potters placed on the turntable rotating turntable bared both momentum and then gently push on the foot size to weight, used puncher patted the soil at the foot stature legs tightly and product size round back.

    Step 5 : Decorated and enameled

    Engineering drawing: Potter used paintbrushes paint directly on the pattern carpentry background information.

    Ceramic painter must have skilled, patterned motifs to harmonize with modern ceramics, the decorative motifs were raised to the level of art pottery, each of which is a work

    -Home Men: When finished wooden products, the potter can reheated product at low temperature and then serve immediately brought enameled or wooden products which complete direct then glazed uphill hot

    Step 6: Process furnaces:

    There are many types of pottery kilns but now the potters are baked in the oven as this gas can regulate the fire without damage to the ceramic products.
     

Chia sẻ trang này

Đang tải...